---
url: /cameras/live-view.md
---

# Live view

Open any camera to watch it live.

## Player controls

* **Play / pause** the live stream.
* **Mute / unmute** for cameras with audio.
* **Two-way talk** to speak through the camera (see below).
* **Fullscreen** and **Picture-in-Picture** to pop the video into a floating window. In fullscreen the dots in the control bar switch **Shortcuts**, the **Timeline** over the video and the **PiP Source** overlay. On a phone held upright, the timeline sits at the bottom of the screen, below the picture.
* **Digital zoom** by scrolling or pinching, up to 5×, with a minimap. Drag to pan when zoomed in. The crop holds while you scrub the timeline, until you double-click the picture or zoom back out.
* **Quality** switches the source resolution (**High**, **Mid**, or **Low Resolution**).
* **Open camera** opens the full camera page with recordings and the timeline.

When you review recordings, the player also offers rewind, fast-forward, and playback speed. See [Timeline & playback](/recording/timeline-playback).

## Detection boxes

With **Detections** on, the player draws a box around everything the camera currently sees, with the type, the confidence and the track number. A camera that reports a detection without a position gets no box.

An object that has settled, a car parked in the driveway or a bin left at the kerb, keeps its box but gets a faded label and a timer counting how long it has been standing there. A settled object triggers no new events and no notifications, see [stationary objects](/detection/events-and-detections#stationary-objects). It goes back to a normal box as soon as it moves again. On a small card the labels are left out and only the box remains.

## Two-way talk

The **Intercom** button sends your microphone to the camera's speaker, on cameras that support two-way audio.

## Second stream overlay

Give a source a **PiP Source** in the camera [settings](/cameras/settings) (Sources tab) and the player gets a **Toggle PiP** button. It shows that second stream as a small overlay on the video. Click the overlay to swap the two streams.

The PiP Source can also be a stream of another camera, the list groups them by camera. That fits a second lens of the same device, such as the tele lens of a dual-lens camera added as a camera of its own. Clicking that overlay opens the other camera with its timeline and recordings, at the same moment while you review footage, and the camera you came from becomes its overlay.

## Streaming modes

You set the streaming mode per camera in its [settings](/cameras/settings), where a new camera starts on **Auto**. The player also has a button to switch between WebRTC and MSE while you watch.

* **Auto** starts WebRTC and MSE together and keeps whichever connects first, so a network that blocks WebRTC still gets a picture. After falling back to MSE it tries WebRTC again in the background now and then and takes over once it connects. When the camera's codec cannot travel over WebRTC it goes straight to MSE.
* **WebRTC** gives the lowest latency.
* **MSE** is a broadly compatible fallback.
* **webrtc/tcp** sends WebRTC over TCP only. Pick it in the camera settings if some networks block the ports WebRTC normally uses. It is not available from the player button.

The setting applies to the camera view. The small players elsewhere, the zone editor, shortcut previews, the floor plan hover and the event dialog, always run on Auto.

An **MJPEG** camera plays as MJPEG in every mode, in the browser, the mobile apps and the Apple TV app. The picture arrives as single JPEG frames, the sound, if the camera has any, over MSE. [Recording](/recording/) takes MJPEG as it is.

## Activity mode: Always On and Standby

Each camera has an **Activity mode** that controls when its stream runs:

* **Always On** keeps the stream live while the player is in view.
* **Standby** keeps the stream off until you click the video. It stops again a few seconds after your last click or after the picture appears, whichever is later. It stays on while you use the intercom, the PTZ controls, fullscreen, Picture-in-Picture or a menu of the player.
* **Activity** keeps the stream running while there is activity and lets it rest otherwise.

The setting applies to the camera view and to the [Home Assistant camera card](/home-assistant/card#camera-ui-camera) in `live` mode. [Camview](/cameras/camview) and the Home Assistant [view card](/home-assistant/card#camera-ui-view) follow it too, unless they are set to one mode for the whole view. The small players elsewhere always stay on: the zone editor, shortcut previews, the floor plan hover and the event dialog.

Whatever the mode, a player scrolled out of view stops after about 10 seconds and shows its last picture until you scroll back, then starts again. The intercom, the PTZ controls, fullscreen, Picture-in-Picture and an open player menu keep it running, as in Standby.

## Shortcuts

**Shortcuts** are controls you place on the video to jump to another camera or operate a sensor. Turn on **Edit Shortcuts** on the player to add them. See [Shortcuts](/cameras/shortcuts).

## The toolbar

The bar under the player holds **Shortcuts**, **Ask the assistant**, **Play on another screen** and, for admins, **Settings**, next to two menus. **Layers** toggles what shows over the picture: **Detections** on cameras that run motion or object detection, **Zones**, **Heatmap**, and **AI descriptions** when the NVR plugin is installed. The dots hold **Capture snapshot**, and for admins **Share Camera** and, during playback, **Show detection trace**. **Ask the assistant** shows once the [assistant](/assistant/) is set up, on a phone on the timeline next to the microphone. See [Detection & AI](/detection/).

Cameras with pan, tilt and zoom get their own bar at the top right of the player, with the home position, the presets saved on the camera, and the **PTZ** button for the on-screen controls. See [PTZ & autotrack](/sensors/ptz).

## Symbols on the player

Symbols at the top right of the player tell you about the stream. Hover or tap one for its text. They hide while the on-screen PTZ controls are open.

* **Red circle.** Live view is unavailable, the text gives the reason. The spinner shows that camera.ui keeps trying.
* **Red info symbol.** The player shows another quality than you picked, because this device cannot play H.265 for example.
* **Cloud.** Live view runs through the [relay](/remote/#webrtc). Admins only.
* **White info symbol.** No direct connection formed, so live view has more delay. Switching on the relay can help. Admins only, while the relay is off.

## The camera page

**Open camera** (or selecting a camera from the list) opens its full page: the live player, a **Recordings** tab, a list to switch between **Cameras**, **Shares** for admins, and a **Timeline** panel for jumping through footage. The player takes up to half the height, a wide picture less, and the tabs get the rest. Drag the handle between the player and the tabs to give either more height; the browser keeps that split, a double-click on the handle resets it. The **Settings** cog (admins) opens the [camera settings](/cameras/settings) drawer, where a camera's sources, zones, PTZ, detection, and more live.

The **Recordings** tab lists the camera's events like the [Recordings](/recording/browsing) page: objects, sensors and alarm sounds, and motion too on a camera without object detection. The filter button at its bottom right narrows the list by text, day, confidence, label, the camera's sensors and sounds, and vehicle color and type. With a label, sensor or sound picked, the list shows exactly that, **Motion** for example. Each camera keeps its pick with your account, text and day are not saved. The button above it turns on the zone filter: mark areas on the camera picture, the timeline filters by the same zone.

To watch several cameras at once, use [Camview](/cameras/camview).
